19335 Bulkhead Antenna Cable Installed in Enclosure, Type N to RPSMA

Aperçu

The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N socket (female) bulkhead connector on one end and an RPSMA pin (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195. This cable assembly is generally used with an RF401-series radio, CR206X datalogger, AVW206 spectrum analyzer, or NL240 Wi-Fi interface inside the enclosure and a Type N pin (male)-terminated radio-antenna cable outside the enclosure. To order just the cable, ask for pn 19330.

Lire la suite

Avantages et caractéristiques

  • Résistant aux intempéries pour protéger les instruments
  • Allows quick attachment of antenna without opening enclosure

Images

Description technique

The 19335 allows you to attach an antenna cable to the outside of the enclosure. It is intended for enclosures that will house an RF401-series spread-spectrum radio, RF430-series spread-spectrum radio, CR200(X)-series datalooger, or AVW200-series vibrating wire interface. When ordered, Campbell Scientific will punch a special bulkhead hole in the enclosure and install a 17" (43.2 cm) cable.

The installed cable has a type-RPSMA pin (male) connector on one end and a type-N bulkhead socket (female) connector on the other end. The type-RPSMA pin (male) connector attaches to the radio, data logger, or interface. The type-N socket (female) connector attaches to the antenna via a COAXNTN-L or a similar type-N pin (male) to type-N pin (male) cable.

Compatibilité

Veuillez noter : Ce qui suit montre des informations de compatibilité générales. Ce n'est pas une liste complète de tous les produits compatibles.

Centrale de mesure

Produits Compatibilité Note
CR216X (obsolète)

Mesure et contrôle

Produits Compatibilité Note
AVW216

Interfaces de communication

Produits Compatibilité Note
RF416
RF432

Informations de compatibilité supplémentaires

The 19335's 17-in. cable connects to a device that has a type-N-to-RPSMA antenna connector.

Contemporary devices with a type-N-to-RPSMA connector

  • RF401 900-MHz Spread Spectrum Radio
  • RF411 922-MHz Spread Spectrum Radio
  • RF416 2.4-GHz Spread Spectrum Radio
  • RF430 900-MHz Spread Spectrum Radio
  • RF431 922-MHz Spread Spectrum Radio
  • RF432 2.4-GHz Spread Spectrum Radio
  • CR206X Datalogger with 900-MHz Radio
  • CR211X Datalogger with 922-MHz Radio
  • CR216X Datalogger with 2.4-GHz Radio
  • AVW206 Vibrating Wire Interface with 900-MHz Radio
  • AVW211 Vibrating Wire Interface with 922-MHz Radio
  • AVW216 Vibrating Wire Interface with 2.4-GHz Radio

Retired devices with a type-N-to-RPSMA connector

  • RF400 900-MHz Spread Spectrum Radio
  • RF410 922-MHz Spread Spectrum Radio
  • RF415 2.4-GHz Spread Spectrum Radio
  • CR206 Datalogger with 900-MHz Radio
  • CR211 Datalogger with 922-MHz Radio
  • CR216 Datalogger with 2.4-GHz Radi
  • CR205 Datalogger with 900-MHz Radio
  • CR210 Datalogger with 922-MHz Radio
  • CR215 Datalogger with 2.4-GHz Radio

Spécifications

Longueur du câble 43,18 cm
Poids 90,72 g